Dual-Station Vacuum Hot Press
The dual-station vacuum hot press supports one operator running two stations alternately, with loading/unloading and hot pressing in parallel, raising output per operator. Suitable for continuous batch production of small and medium parts, with independent pressure and temperature control on each station.
Get a Quote →
Product Introduction
This kind of dual-station CNC hot press is suitable for one operator running two machines simultaneously. It is intended for products with long pressure-holding times and high output. Driven by a single motor and oil pump with two hydraulic control systems, it offers energy savings, lower cost and a smaller footprint.
Product Features
1. A servo oil-circuit system is used, with adjustable and controllable pressure.
Low noise, high efficiency and energy saving, with a high yield rate.
2. Mould-temperature-controller heating gives stable temperature.
The deviation is within ±1 °C, greatly improving product yield.
3. High precision; pressure control accuracy is ±2%.
Uniform temperature and low heat loss.
4. Staged and zoned control of temperature and pressure.
Staged pressing, staged heating and ramp heating.
5. Fully automatic PLC control.
Pressure, displacement and speed are set digitally.
6. The heating process can be set with multi-stage heating.
This makes the temperature more accurate, with independent top and bottom heating control.
7. The electrical control system uses an industrial PLC and a touch-screen HMI, making operation simple.
Scope of Application
Suitable for: the 3C and mobile-phone industry, automotive and motorcycle industry, aviation, military, high-tech industry, high-speed rail, electric vehicles, automobiles and motorcycles.
1. 3C and mobile-phone industry: AR smart glasses, helmets, mobile-phone front and back covers, protective cases.
2. Automotive and motorcycle industry: automotive modification parts, motorcycle modification parts, licence-plate frames.
3. Aviation industry: aviation parts, UAV parts.
4. High-tech industry: robot parts, robot-dog parts.
Technical Parameters
| Model | 63T | 100T | 160T | 200T | 250T | 315T | 400T | 500T | 630T | 800T | 1000T |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. fluid pressure (MPa) | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Max. daylight (mm) | 700 | 800 | 700 | 900 | 1000 | 1250 | 1400 | 1500 | 1500 | 1500 | 1500 |
| Slider stroke (mm) | 400 | 500 | 400 | 500 | 600 | 800 | 800 | 800 | 900 | 900 | 900 |
| Table effective area, left–right (mm) | 500 | 700 | 800 | 900 | 900 | 1200 | 1200 | 1400 | 1500 | 1600 | 1600 |
| Table effective area, front–back (mm) | 500 | 600 | 800 | 900 | 900 | 1200 | 1200 | 1400 | 1500 | 1600 | 1600 |
| Fast down speed, no load (mm/s) | ≥100 | ||||||||||
| Working speed (mm/s) | 8-15 | ||||||||||
| Return speed (mm/s) | 70 | ||||||||||
| Ejecting force (T) | 20 | 20 | 30 | 50 | 50 | 63 | 100 | 100 | 100 | 120 | 120 |
| Ejecting stroke (mm) | 200 | 200 | 200 | 250 | 250 | 250 | 300 | 300 | 300 | 350 | 350 |
| Servo power (kW) | 7 | 10 | 14 | 18 | 25 | 25 | 45 | 52 | 25 | 25 | 30 |
Equipment images and parameters are supplied product references. Final configuration and process performance are confirmed in the technical proposal.


