Wuxi Kelai NC Machine Tool Co., Ltd.
SOCIAL PROFILES

Connect with KLT.

Add the company page and channel addresses when they are ready. These links are saved for this browser preview.

KLT — Your truly partner

Carbon-Fiber UAV Hot-Forming Press

Developed for consumer, industrial, surveying and plant-protection, and heavy-load inspection UAV carbon-fiber components; compatible with epoxy prepreg, thermoplastic carbon-fiber sheet and carbon cloth with resin film, forming shells, frames, blades, arms and battery bays in one cycle.

Get a Quote →

1. Product Overview

Place the carbon-fiber prepreg cut according to the lay-up design into the dedicated forming mould; the machine completes a three-stage closed-loop process along a preset automatic curve:

Staged heating and impregnation: multiple independently heated platens warm up at a steady rate (2–5 °C/min); the resin softens and flows, fully impregnating the carbon-fiber tows and eliminating internal bubbles;

Multi-stage high-pressure holding and curing: the servo hydraulic system applies constant pressure, with pre-pressure, high-pressure and stabilising stages per the process, ensuring uniform fiber arrangement and full resin cross-linking cure, and preventing delamination, short shots and warping;

Holding-synchronous cooling and shaping: a constant-temperature cooling system cools under pressure to prevent demoulding deformation, ensuring consistent curved contours, thickness and weight, and completing high-precision one-piece forming.

3. Core Structural Configuration

High-rigidity machine body

A four-column / integral frame structure; after welding, the steel plate is stress-relief annealed, with slider parallelism within 0.02 mm/m, so large-tonnage long-term clamping does not deform; platen size can be customised from 300 × 300 mm to 1600 × 1200 mm, covering mould needs from small aerial cameras to hundred-kilogram-class heavy-load UAVs.

Servo precision hydraulic system

A servo-driven oil pump with pressure adjustment accuracy of ±0.5%, supporting 0–500 T tonnage customisation; compared with ordinary hydraulics it saves 50%–70% energy, with low oil temperature and low noise and very small pressure fluctuation, suitable for uniform pressing of thin propeller curved surfaces.

Multi-zone independent closed-loop temperature-control system

Upper and lower mould heating platens have zoned temperature control, with thermal-oil / electric-heating dual options; control range 40–200 °C with overall mould temperature difference within ±2 °C; high-speed PID sampling temperature control supports custom heating, holding and cooling rates, adapting to curing curves of different resins such as epoxy and PEEK, perfectly solving the local overheating and uneven-curing pain points of thin-walled UAV parts.

Intelligent PLC HMI control system

Operation via a 10-inch touch screen, capable of storing hundreds of UAV-specific process recipes; multi-stage temperature, pressure, time and stroke curves can be freely edited and run automatically with one click; built-in multiple safety alarms for over-temperature, over-pressure, abnormal oil temperature and low pressure, with production data storable and exportable for quality traceability.

Auxiliary optional modules

Automatic push-pull mould frames, ejection demoulding mechanisms, vacuum exhaust devices, water-cooled rapid cooling, safety light curtains, IoT remote monitoring, and one-out-multiple-cavity synchronous forming fixtures.

1. High forming accuracy, matching the strict lightweight targets of UAVs

Finished-part thickness tolerance within 0.05 mm, whole-machine weight deviation controlled at ±3–5 g;

Curved-profile and flatness within 0.1 mm; propeller dynamic balance and frame assembly-hole positions meet standards in one pass, reducing secondary machining;

No internal porosity or delamination; stable peel and tensile strength, meeting high-altitude vibration and drop-test standards.

2. Greatly improved yield, lower material loss

Zoned uniform temperature control + full-process stabilised-pressure venting thoroughly solves the common thin-walled UAV-part defects of warping, whitening, delamination, resin shortage and bubbles; yield rises to above 98%, greatly saving costly carbon-fiber prepreg.

3. Automated batch production, high efficiency

Single-mould cycle 8–15 minutes, supporting 2/4-cavity moulds; no manual attendance needed throughout, with a single machine producing hundreds of frames / blades per day, suitable for scaled UAV-factory flow lines.

4. Compatible with all categories of UAV carbon-fiber parts

Covers consumer aerial-photography, surveying, plant protection, inspection and small military UAV full-structure parts; no host change needed, only mould switching for flexible production changeover.

5. Energy-saving and stable, low long-term operating cost

Servo energy-saving hydraulics + nano thermal-insulation layer reduce heat loss by 40%; key seals and heating elements use resin-corrosion-resistant materials, running 8000 hours continuously without fault and with simple maintenance.

5. Main Applicable Formed Products

UAV power parts: carbon-fiber positive/negative propeller blades, multi-axis propellers, power arms;

Airframe main structures: one-piece airframe shells, centre frames, upper and lower housings, tail fins;

Functional protective accessories: carbon-fiber battery-bay housings, gimbal protective covers, radar carrier boards, landing-gear brackets;

Large industrial UAV parts: wing skins, load-bearing beams, equipment mounting base plates, integrated load-bearing frames.

Nominal pressure: 50 T, 100 T, 150 T, 200 T, 315 T, 500 T (small blades 50–150 T; large frames / skins 315–500 T);

Effective heating-platen size: 300 × 300 mm to 1600 × 1200 mm;

Temperature-control range: room temperature to 200 °C, temperature difference within ±2 °C;

Forming stroke: 100–500 mm, customisable;

Control mode: fully automatic PLC touch control, multi-stage process curves programmable.

7. Industry Application Value

The core bottleneck of UAV endurance and payload is self-weight; carbon-fiber parts can achieve 30%–60% weight reduction while offering five times the specific strength of steel. Through standardised precision hot-pressing, this machine stably produces lightweight high-strength carbon-fiber parts, helping manufacturers improve UAV range, load capacity and wind and fatigue resistance, while simplifying processes and reducing manufacturing cost, suitable for low-altitude-economy UAV mass manufacturing.

Equipment images and parameters are supplied product references. Final configuration and process performance are confirmed in the technical proposal.

← All carbon-fiber equipment
Discuss this product →